Open Canon XA30 AVCHD .mts files in Final Cut Pro X

Don’t know how to transfer Canon XA30 AVCHD .mts files to FCP X for editing? This article will teach you how to. Read on.

Canon XA30 captures AVCHD up to 1920×1080 video at 23.98p, 29.97p, 59.94p, and 59.94i frame rates. AVCHD uses the MPEG-4 AVC/H.264 standard, supporting a variety of standard, high definition, and stereoscopic (3D) video resolutions. The problem is that the advanced compression method of H.264 is not so friendly for editing software including Final Cut Pro (X). Below, we will outline how to import MTS files from Canon XA30 to FCP for further editing without any issue. Keep reading.

As one of the most popular non-linear editing systems, FCP X allows for film editing, uncompressed standard definition (SD) video and high definition (HD) editing and finishing. Currently, the best supported format for FCP X is Apple ProRes. Therefore, if you transfer Canon XA30 MTS files into FCP X for editing, you’d better get a professional third party program to change MTS to ProRes codec. Here you can get Brorsoft MTS/M2TS Converter for Mac to achieve the goal effortlessly.

It helps users to transcode Canon XA30 AVCHD MTS files to the optimal preset profiles for Final Cut Pro (Apple ProRes), Avid Media Composer (DNxHD), Adobe Premiere Pro (MPEG-2), iMovie (AIC) and more. And if you wanna get Apple ProRes codec on Windows, please turn to Brorsoft MTS Converter. Download the software on computer and follwo the guide below to start conversion.

Convert Canon XA30 MTS clip to Apple ProRes for FCP

1: You need to install and run the Mac MTS Converter and load your Canon XA30 .mts files to it by clicking “Add” button. Or you can drag&drop the files into the program directly.

2: Click on the Format box and select a proper format in dropdown-list. To import XA30 videos to Final Cut Pro X or FCP 6/7, you are advised to choose “Apple ProRes 422 (*.mov)”or “Apple ProRes 422 HQ (*.mov)” format for Final Cut Pro.

3: Adjust the video and audio parameters including the Bitrate of Video&Audio, Video Size, Sample Rate, Frame Rate, Audio Channels, etc., by clicking the Settings button for getting the best quality before starting conversion.

4: Finally, tap “Convert” button to start the Canon XA30 MTS conversion on Mac OS X. Once the conversion finished, you can smoothly edit the converted MTS files in FCP perfectly.

Read More:

How to Edit Canon XA30 MTS videos in Premiere Pro
How to Open Canon XA35 MTS videos in FCP
How to Import Canon C100 MTS videos in Sony Vegas

Guide on Editing Canon C100 Mark II .mts in FCP

Wanna get a fluent workflow of Canon C100 Mark II .mts clips in FCP? This article will teach you how to convert and import Canon C100 Mark II AVCHD videos in FCP.

I have have been using FCPX for several months. Basically I must use the media import command to ingest the footage (Canon C100 Mark II MTS videos ), which sometimes will make the FCP X jerk. I’ve read that some editors rewrap using Clip Wrap and other programs before importing Canon C100 Mark II MTS videos to FCP. That sounds fair.
The only reason I can see the need for re-wrapping is to make the editing process smooth. After testing almost all kind of third party programs online including Clip Wrap, I finnally got a powerful but simple program for you-Brorsoft MTS Converter for Mac.

With it, you effortlessly encode/re-encode AVCHD MTS footage shot from Canon C100 , C100 Mark II to FCP highly compatible ProRes MOV, ensuring maximum editing quality and efficiency when working with Final Cut Pro X or FCP 7. Besides, its also exports the optimized codecs for NLEs like AIC for iMovie, DNxHD for Avid, MPEG-2 for Premiere, .etc. The most important thing is that its Windows version also offers Apple ProRes codec. Now, download the software on computer and follow the guide below to start conversion.

Import Canon C100 Mark II .mts to FCP for smooth editing

Step One: Install and run the Canon MTS Converter on mac, and click “Add” button to import the original Canon C100 Mark II .mts videos. Or you can drag&drop the files into the program directly.

Step Two: Click on the Format box and select the FCP friendly format in dropdown-list. You are advised to choose “Apple ProRes 422 (*.mov)”or “Apple ProRes 422 HQ (*.mov)” format.

Tip: Before conversion, you can adjust codec, bit rate, frame rate, sample rate and audio channel in the “Settings” page.

Step Three: Tap the “Convert” button to Canon C100 Mark II AVCHD clips to ProRes 422 conversion.

After conversion, run FCP and follow Click File –> Import –> Files to ingest the encoded C100 Mark II MTS recordings to FCP.

Read More:

How to Edit Canon C100 MTS videos in FCP 7
How to Import Canon C100 to Premiere
How to Open Canon C100 MTS videos in Sony Vegas

Working Canon AVCHD videos in FCP 7/X

Can Canon MTS videos be supported by Final Cut Pro? In this article, we will give you the tips how to import and edit Canon AVCHD MTS files in FCP 7/X without any problem.

Most of Canon AVCHD camcorders are compact, high-performance professional camcorder, which feature both MP4 (up to 35 Mbps) and AVCHD (up to 28 Mbps) codecs at up to 1080/60p resolution for virtually blur-free, high-quality capture of fast-moving subjects. You should have been satisfied with them until you meet the ingesting problem while importing Canon AVCHD footage to FCP 7/X for further editing, as some Canon users encountered below:

“Got a lot of AVCHD videos from Canon and planed to editing these videos in FCP 7. However, the problem is that FCP can not support such format well. What I got was a video without audio. How can I edit Canon AVCHD videos in FCP? Thank you for any tip!”

Why Final Cut Pro refused opening AVCHD footage?

Reason One: FCP won’t recognize .MTS files without the complete folder structure. If you’ve only copied some separate video files from your Canon camcorder without keeping the BDMV folder within the AVCHD folder, you will fail when attempting to import them to FCP 6/7 or the FCP X.

Reason Two: If some related files like .cpi, .mpl for particular .mts videos were deleted by accident, or not copied from the camcorder, FCP will import some videos only, with others not.

Reason Three: AVCHD files are recorded in 1080/60p AVCHD or 1080/50p, which is not well supported by FCP yet.

Reason Four: Your computer environment limited you to do so or some unknown reason.

Therefore, in order to open Canon MTS videos in FCP 7/X easily, you’d better encode the MTS format to Apple ProRes first, the most compatible video codec for FCP. Here Brorsoft MTS Converter for Mac can help you deal with Canon AVCHD files into most NLEs including FCP, iMovie, Avid, Premiere and more. Now, download the software and follow the guide below to start conversion.

How to Change Canon AVCHD MTS to Apple ProRes

Step 1: Install and run the Mac MTS to FCP Converter, you can click “Add Video” button (or “Add from folder”) to load AVCHD MTS source files.

Step 2: Click on “Format” bar and set a FCP friendly format in dropdown-list. You are advised to “Follow Final Cut Pro” template and “Apple ProRes 422 (*.mov)” format.

Tip: Go to the “Settings” page to customize proper video/audio parameters if necessary. Video size, bitrate and fame rate are flexible and can be adjusted as you like. Usually 1920*1080 video size and 30fps video frame rate are recommended for FCP editing.

Step 3: Tap “Convert” to start converting Canon AVCHD MTS to Apple ProRes 422 codec. After conversion just click the “Open” button to locate converted video files for FCP 7/X post-production seamlessly.

Read More:

Top 5 MTS/M2TS Converter Review
How to Edit Canon C100 MTS Videos in Premiere
How to Convert Canon C100 to FCP

Canon MTS in FCP 7-Import Canon C100 MTS videos in FCP 7

This article will teach you how to edit Canon C100 MTS videos in FCP 7 with ProRes codec.


I have been shooting on the Canon C100 and plan to edit MTS files in FCP 7. However when I try to link the raw MTS files, Final Cut Pro doesn’t recognise them. I also tried log and transfer, it was useless. That’s much frustrated. After searching on Google, I got some clues. If you also meet such trouble, keep reading.

Some guys in creativecow.com mentioned that FCP doesn’t work with the raw AVCHD files. What we need to do is media manage the cut and reimport the footage at a higher resolution, like ProRes 422. Not HQ, that’s overkill and the only gains we make are in file size, not quality…as HQ is meant for 10 bit formats, and AVCHD is 8-bit…

Therefore, I turn to test some third party programs to convert Canon C100 MTS to Apple ProRes. There are a numbers of encoding programs online if you are digging on Google. Based on countless tests, I finally chose Brorsoft MTS Converter for Mac.

With it, we can easily rewrap and transcode Canon C100 AVCHD MTS to ProRes codec, which ensures the best result when working with Final Cut Pro 7/X. Besides, ProRes codec, it offers other optimized codecs for NLEs like DNxHD for Avid, AIC for iMovie, MPEG-2 for Premiere and more. If you wanna get ProRes codec on PC, then Brorsoft MTS Converter windows version is your first choice. Now, download the software on computer and let’s start conversion.

How to Open Canon C100 MTS videos in FCP 7

Step One: Set up the video converter app on your computer, and then Click Add Video button to load your source files from your C100 camera. You can directly drag and drop the MTS videos stored on your computer’s hard disk drive to the program.

Step Two: Click on “Format” bar and set a FCP friendly format in dropdown-list. You are advised to “Follow Final Cut Pro” template and “Apple ProRes 422 (*.mov)” format.

Tip: Go to “Settings” page, and customize proper video/audio parameters if necessary. Video size, bitrate and fame rate are flexible and can be adjusted as you like.

Step Three: When everything is OK, click Convert button to start converting Canon C100 MTS to Final Cut Pro editable Apple ProRes 422 codec. Once the conversion finished, click “Open” button to get the generated ProRes MOV files.

Finally, launch Final Cut Pro, choose File > Import > Files…, and browse to where you save the converted AVCHD clips to. Choose the videos that you’d like to add.